The California Water Boards' Annual Performance Report - Fiscal Year 2008-09
  
    | REGULATE: NPDES STORMWATER |  |  | 
  
    | 
        
          | GROUP: | NPDES STORMWATER CONSTRUCTION FACILITIES |  | 
        
          | MEASURE: | NUMBER OF INSPECTIONS NUMBER OF FACILITIES INSPECTED
 |  | 
  
    | 
        
          | MESSAGE: | Stormwater Construction inspections account for 50% of all inspections conducted statewide for all programs. |  | 
        
          | KEY STATISTICS FOR FY 2008-09 |  
         | Number of Active Facilities | 17,123 |  
         | Number of Inspections | 2,817 |  
          | Number of Facilities Inspected | 2,442 |  | 
MEASUREMENTS
 
   
  WHAT  THE MEASURE IS SHOWING
    
      The program conducted 2,817 inspections  at 2,442 facilities. This is the largest number of inspections conducted by any  program statewide. R8 in particular, conducted almost half of the inspections  with 34% of its facilities inspected. Some facilities are inspected more than  once a year, which is why the total number of inspections is greater than the  total number of facilities inspected.        
    
    WHY THIS  MEASURE IS IMPORTANT
    
      Inspections are the primary tool used in the NPDES Stormwater  Construction program to assess compliance with NPDES requirements. The stormwater  construction program is unique in that the industrial activity (construction,  land disturbance) is temporary in nature.   Other industrial activities tend to be more long term (e.g., cement  manufacturing, auto dismantling).  As a  result, it is critical to inspect construction facilities during the actual  construction activity.  Most  construction sites follow a process of (1) Grading and Land Development Phase,  (2) Streets and Utilities Phase, (3) Vertical Construction Phase, and (4) Post  Construction Phase.  The type of storm  water controls varies depending on the phase of construction.  It is also helpful to inspect a construction  site during both wet and dry weather periods to determine permit  compliance.  For all of these reasons,  the storm water program considers inspection of construction facilities a high  priority.
        
    
    TECHNICAL  CONSIDERATIONS
  
  GLOSSARY
  
  - Construction Stormwater Program
- Dischargers whose projects  disturb 1 or more acres of soil or are part of a larger common plan of  development that in total disturbs 1 or more acres, are required to obtain  coverage under the General Permit for Discharges of Storm Water Associated with  Construction Activity (Construction General Permit, 99-08-DWQ).
 
 
- General Permit 
- An NPDES permit issued under 40 CFR 122.28  that authorizes a category of discharges within a geographical area. A general  permit is not specifically tailored for an individual discharger.
 
 
- National Pollutant Discharge Elimination  System (NPDES) 
- The NPDES permit  program (Section 402 of the Clean  Water Act ) controls water pollution by regulating point sources that  discharge pollutants into waters of the United States. Point sources are discrete  conveyances such as pipes or man-made ditches. Individual homes that are  connected to a municipal system, use a septic system, or do not have a surface  discharge do not need an NPDES permit; however, industrial, municipal, and  other facilities must obtain permits if their discharges go directly to surface  waters.  US EPA has approved the Water  Board’s program to issue NPDES permits.