The California Water Boards' Annual Performance Report - Fiscal Year 2016-17
REGULATE: LAND DISPOSAL |
|
|
||||
|
|
MEASUREMENTS
|
FusionCharts will load here
|
FusionCharts will load here
WHAT THE MEASURE IS SHOWING
WHY THIS MEASURE IS IMPORTANT
TECHNICAL CONSIDERATIONS
- Data Source: CIWQS. Period July 1, 2016 to June 30, 2017.
- Unit of Measure: Number of active regulated facilities as of June 30 during FY 16-17.
- Data Definitions: Permits issued during FY 15-16: Effective date between July 1, 2016 and June 30, 2017. Permits Current: Permits not expired and not issued in FY 16-17. Permits Past Scheduled Review Date: Permits with an expiration date before June 30, 2017. Permits Reviewed/Updated: Permits with a review/update date within FY 16-17.
- References: Information on the Water Boards’ Land Disposal Program
Public Reports and Data
Enforcement and Compliance Assurance Information
GLOSSARY
- Land Disposal
- The Land Disposal program regulates of waste discharge to land for treatment, storage and disposal in waste management units. Waste management units include waste piles, surface impoundments, and landfills. California Code of Regulations (CCR) Title 23, (Chapter 15) contains the regulatory requirements for hazardous waste. CCR Title 27, contains the regulatory requirements for wastes other than hazardous waste.
- Review/Update Actions
- The Waste Discharge Requirements WDRs are to be reviewed according to a schedule based upon their TTWQ Category as follows: TTWQ 1= Every 5 years, TTWQ 2= Every 10 years and TTWQ 3= Every 15 years. TTWQ 1 has the highest priority. There are three possible actions which may result from the WDR review/update process: rescission, continuance, or revision. A revision requires the issuance of a new WDR with a new adoption date. No formal Regional Board action is required to continue WDRs without change. A memorandum signed by the Regional Board Executive Officer (EO), documenting that the review concluded that the existing WDR is appropriate and that no changes are necessary at this time, is placed in the WDR file.